BREMI CAM & CRANKSHAFT SENSORS
Karlyn is proud to announce the addition of Camshaft &
Crankshaft Sensors to our successful line
of Mass Air Flow (MAF) and Wheel Speed
Bremi Fahrzeug-Elektrik produces
every component of their Sensor program in their own factories with the final
100% testing of each sensor, done in Germany. Their acquisition of “Streicher
Plast” in Germany
has allowed them to become a leader in Injection molded parts for electronics
utilizing the same material, fit and function as OE. All Bremi Cam/Crankshaft
Hall-Effect Sensor IC’s from OE manufacturers. Each Sensor is subjected to an
which compares the sensor data to the OE profile to ensure that it is within
and meets IATF 16949 OE standards. On top of that, Bremi performs this
electrical test both
before and after a full thermal shock test to ensure performance under all
BREMI ABS WHEEL SPEED SENSORS
All Bremi ABS Sensors
use the same material as OE along with fit and function.
Each Sensor is subjected to an electrical test which compares the sensor data to
OE profile to ensure that it is within optimal range. On top of that,
Bremi performs a
full thermal shock test that covers a total of 60 cycles to ensure performance
environmental conditions. Bremi ABS Sensors are exclusively distributed by
Karlyn Industries Inc.
2019 STEERING & SUSPENSION CATALOG
BREMI MAF SENSORS
Bremi Fahrzeug-Elektrik of Germany has been an original equipment
after-market supplier of Ignition products for Generations. Bremi’s
strength lie in their ability to consistently provide industry leadership
with innovative technology.
Their Air Mass Sensors are manufactured under the same standards
(ISO/TS16949) and are
100% tested, resulting in a durable, high performance product that
you can rely on!
BREMI MAF SENSOR VIDEO
Download our 2019 Coil Catalog
This catalog contains
all the parts we carry for coils with illustrations.
Please check our "Ignition Spark Plug Wire Set & Ignition Finder" for our latest
SPARK PLUG CONNECTOR TOOL
IF YOU DO NOT
HAVE THE EXPENSIVE FACTORY TOOL TO REMOVE OR INSTALL
THE ABOVE MB WIRE SETS, WE OFFER THE SAME WRENCH FOR MUCH LESS!
CONTACT YOUR DISTRIBUTOR TO ORDER
OUR CROWS FOOT WRENCH #2771Z,
SO THAT YOU DO NOT DESTROY THE WIRE SET OR YOUR KNUCKLES.
Karlyn Industries carries BREMI/Germany
RapidEnergy glow plugs.
They feature a sophisticated and proven design corresponding to the high OE
for diesel vehicles of all major automotive manufacturers.
Achieving a maximum market coverage
with just a few part numbers and manufactured to the ISO 9001 quality standard.
REDESIGNED MB SPARK PLUG CONNECTOR
FOR THE #643 (V6) & #661 (V8) WIRE SETS
THESE NEW SPARK
PLUG CONNECTORS PROVIDE A BEARING AREA WHICH ALLOWS
THE INSTALLER TO USE THE FACTORY TOOL TO EASILY REMOVE OR INSTALL THE WIRE SET.
FOR A DETAILED EXPLANATION
Home | Products | Karlyn Profile | Bremi
Profile | Catalog |